Fractal Plying on a Drop Spindle

BOJ7

Fractal plying seems to be everywhere I look in the spinning world. And for good reason- it’s an interesting way to work with color that adds a bit of spontaneity and surprise to the look of the finished product. I’ve been excitedly waiting for the right moment to spin up the 50/50 Merino Silk top from Corgi Hill Farm, and this seemed to be it.

The quintessential Noddy Shot

The quintessential Noddy Shot

Ben from Schacht Spindle Blog has a wonderful explanation of fractal spinning here. It’s really fairly straightforward for a 2-ply yarn: Take roving, split in half down the middle. Set aside one 1/2 portion, take the other 1/2 portion and split it into quarters.

The 1/2 portion gets spun from end to end into a single, creating long color changes. The quarter portions get spun end to end one after another into one long single with four repeats of shorter color changes. See? Barely any math at all!

The key to keeping things fractal is always spinning from the same direction. Say one end of your roving is red and one is blue. If you start to spin one portion of roving from the red end, you will also start every other portion of roving from the red end as well.

Lovely right? Except I’m working with a drop spindle, which presents unique problems. There’s simply no way I am going to fit 2 oz of laceweight single ply on a 5/8 oz drop spindle, which means that my two portions of fiber can’t be spun or plied as uninterrupted singles. Since most descriptions of fractal plying are on spinning wheels, this problem isn’t mentioned much – you load your 1/2 portion onto a bobbin and your 4 1/8 portions onto a different bobbin – easy. Not so with the spindle – 21 g of fiber loaded on was pushing it.

The only other reference to fractal plying with a drop spindle I have seen so far is the Spinning for Stripes series of posts from “Mom” at Simply Notable. After some comment-area sleuthing, I discovered that Mom using felted joining on her singles to get around this problem.

I am way too uptight and control-freaky for that, plus my attempts at felted joins never seem to hold up (especially not in this case, since my fiber is half silk!). I was going to have to spin separate skeins.

My solution? Spin one of my quarter portions from end to end – load onto a toilet paper roll, and weigh it out (subtracting the weight of the cardboard roll). This portion weighed out to 17 grams.

BOJSingles2

The short repeat ply is up front (labeled as 1/4 – 17 g) and the longer repeat is at the back.

Take the 1/2 portion (the roving that is half of the original) and weigh out the first 17 grams, taking care to start at the correct end, and separate the length (as you would to grab a piece – not down the middle). Spin up this 17 grams and load it onto a toilet paper roll. Once plied together with the 17 grams of 1/4 portion, this will be Skein #1.

The first 17 g of the 1/2 portion of roving

The first 17 g of the 1/2 portion of roving

This first part worked awesomely, producing a perfectly matched pair of plies to make into a yarn.

BOJnoddy2

The first two singles plied together to form the first skein of fractal yarn.

The moment I measured out 21 grams for the next skein, I knew there would be a problem: Due to my imprecise splitting of the roving, my main roving section was not going to measure up to all my 1/4 portions. I was going to have over 10 grams of leftover singles. Disappointing.

Well, next time I will weigh out my roving as I’m splitting it, and hopefully that will help. As for the leftover singles, I will just ply them differently. Carrying on!

The weighing strategy worked well, at least, for making sure my plies were nearly the same length – the yardage for #2 was not perfectly matched like for #1, but it was very close.

BOJ3

I couldn’t resist posting pictures, even though I am still currently working on producing skein #3. I did mess around with chain/Navajo plying some of the extra fiber, for comparing and contrasting and such.

The Navajo ply method keeps the colors tidily separated

The Navajo ply method keeps the colors tidily separated

Lastly I’d like to add that since my fiber was dyed in a repeating colorway, it’s not really vital to the look of the future FO that I carefully number my skeins – because each skein has a very similar look. However, were I working with a fiber dyed in a gradient colorway the order in which I worked up my skeins would matter a lot more because each skein would contain a long color repeat ply that was different than the other skeins.  Now, more pictures.

BOJ6

BOJ4

I dubbed this yarn “Bag of Jewels” because of the gemstone colors and the rich sheen the silk adds to the finished product. I am excited to knit something with it, but the work involved with spinning it in the first place is definitely an accomplishment in its own right!

-MF

EDIT 9/8/15 – If you’d like a more in-depth look on how to choose rovings for fractal spinning, here’s a great article (as always) from Knitty.

EDIT 6/7/16 – I ended up crocheting with this fractal ply yarn, if you’re curious to see how fractal ply measures up to being crocheted, you can see the piece featuring this yarn here.  As usual with variegated yarns, crocheted pieces muddle the colors more, but it did turn out lovely all the same. AND I was able to make a knit headband to match.

Advertisements

12 thoughts on “Fractal Plying on a Drop Spindle

  1. Pingback: “Stevie” Mandala Duster | Morale Fiber

    • Thank you! I am glad to hear people still use Stumbleupon, lol. I was a rabid Stumbler for a while but then Pinterest won me over in the end. (P.S – sorry it took me so long to reply, I recently discovered a cache of non-spam comments that got put in the Spam folder for some reason and yours was among them)

      Like

  2. Excellent website you have here but I was curious about if you knew of any forums that cover the same topics talked about here? I’d really love to be a part of group where I can get feedback from other knowledgeable individuals that share the same interest. If you have any recommendations, please let me know. Thanks a lot!|

    Like

    • Hi Karima! Sorry it took me so long to reply, this comment got shunted into the spam folder for some reason (I have no idea why!)
      In answer, the most helpful forums I have come across are those on Ravelry, although I don’t have any specific recommendations, Ravelry has group forums that address crocheting, knitting, AND spinning both on a spindle and wheel. I don’t spend much time on forums since I’m usually busy with the blog and with school, but I do think there’s a lot of knowledgeable people on the Ravelry forums from what I’ve seen 😀

      Like

  3. Hi there I am so excited I found your website, I really found you by accident, while I was browsing on Bing for something else, Regardless I am here now and would just like to say thanks for a tremendous post and a all round entertaining blog (I also love the theme/design), I don’t have time to go through it all at the minute but I have book-marked it and also included your RSS feeds, so when I have time I will be back to read a great deal more, Please do keep up the superb jo.|

    Like

  4. Hello there! Quick question that’s entirely off topic. Do you know how to make your site mobile friendly?
    My website looks weird when viewing from my apple iphone.
    I’m trying to find a theme or plugin that might be able to resolve this issue.
    If you have any recommendations, please share. Appreciate
    it!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s